No products in the cart.
All products
Lucky’s Fab Shop bumpers are designed and intended solely for off-road and recreational use. These products are not designed, tested, certified, or warranted to provide occupant protection, crashworthiness, impact mitigation, or compliance with any federal, state, or local motor vehicle safety standards. Installation of a Lucky’s Fab Shop bumper does not increase the vehicle’s ability to withstand collisions and should not be relied upon for protection in the event of an accident. Users assume all risks associated with the installation and use of these products.
You are welcome to call us at 715-200-3567 or email us at in**@***********op.com. We are happy to help work with you to answer your questions and find a solution.
If you have a dump box please contact us. We can help you determine how much effort it will take for our bumper to fit your truck.
There are multiple different brands and styles of dump boxes. There are also multiple different fascias, trims, taillights, and mounts that we have encountered. It is difficult to predict every situation, but here is a list of what we do know. With a little collaboration we can try to get you an acceptable solution.
For Mitsubishi U62:
A different mount is required on the one side of the truck. Please let us know and we will get you the correct brackets.
For Hijet S110:
One solution is to use a cutoff wheel and remove some of the taillight housing except for the top part, and install LED trailer lights. They need to be 4-wire lights. Examples below:
For Hijet S210:
We have seen one instance where the cross tube in the back has a smaller inside diameter than our kit was intended to work with. Please inquire if you have an S210 Dump.
For Hijet S510:
These mounts were designed with the 2015 Kyoto Box. For BOTH the Factory dump box and the Kyoto Box, you will have to relocate your taillights. For newer trucks with parking sensors, you also might have to relocate the sensors.
This list is a work in progress as we encounter more truck configurations. If you have any questions, please call or email us.